1RU LDP Raman Pump Source

Network-Ready Solutions

EXPOSITIONS

ECOC 2010

Booth #359

Raman Pump Sources
1RU - LDP 500, & 700 mW

Based on MPB’s LDP Series of multiplexed laser diode Raman pump sources, the 1RU-Raman line provides distributed Raman amplification in optical transmission fibers.

The unit can be used alone to increase system margins in existing transmission systems (to compensate for increases in span loss due to aging or to allow increases in capacity) or can be combined with other members of MPB’s 1RU product family (Wavelength Converters, Amplifiers and PreAmplifiers) to provide a complete transmission system.

The 1RU Raman pump units include a fiber integrity monitor subsystem which initiates an automatic safety shutdown in the event of a fiber break. Operational control and status and alarm monitoring are via a CRAFT terminal interface.

MPB can provide an unbiased third party opinion on the "best" network solution. For information on link optimization, network cost benefit analysis, system design, or system engineering, contact info@mpbc.ca

Specifications

Raman Pump Sources 1RU - LDP 500 mW- high-power C-band pump

 

1RU-LDP-500-1450 (single wavelength)

 

Signal Wavelength Range 1530-1565 nm
Maximum Pump Power 550 mW
Maximum Average Gain (in SMF-28) 13 dB
Gain Flatness (SMF-28, 12 dB Gavg) +/- 0.5 dB
Effective Noise Figure (SMF-28, 13 dB Gavg) - 1.5 dB
Maximum Pump Degree of Polarization < 6 %
C-Band Insertion Loss < 0.8 dB
Polarization Dependent Loss < 0.1 dB
PMD < 0.1 ps
Optical Connectors SC/PC standard or FC/PC*  

 

Raman Pump Sources 1RU - LDP 700 mW- high-power C-band pump
 

1RU-LDP-700-1426-1454(dual wavelength)

 

 

Min Max  
Signal Wavelength Range 1530 1565 nm
Pump Wavelengths λ1 = 1424
λ2 = 1452
λ1 = 1427
λ2 = 1455
 
Maximum Pump Power   λ1 = 265
λ2 = 440
mW
Maximum Average Gain (in SMF-28)   13 dB
Gain Ripple (Peak to Peak) over signal band at max. average gain In SMF-28   1 dB
Maximum Pump Degree of Polarization   5 %
Signal Insertion Loss   1.7 dB
Polarization Dependent Loss   0.1 dB
PMD   0.2 ps
Optical Connectors SC/PC standard or FC/PC*  

*

other connector type possible; contact MPBC for details