EXPOSITIONS
Booth #359
Boosters
1RU-P -Seriesup to 26 dBm
Based on MPB’s EOA Series Gain Modules, the 1RU-P Series consists of a family of power amplifiers, with up to 26 dBm of output power, and with the lowest noise figure in the industry. They are available in the C- or L-bands, for either single channel or narrow band WDM applications. Gain flattened DWDM boosters are available upon request.
Application
The 1RU-P operates as a power-amplifier. Installed right after the transmission equipment, it provides post amplification of the signal into the link. The units can provide a saturated output signal power of 12 to 26 dBm.
MPB can provide an unbiased third party opinion on the "best" network solution. For information on link optimization, network cost benefit analysis, system design, or system engineering, contact info@mpbc.ca
Specifications
| Optical Parameters | P12 |
P15 |
P17 |
P19 |
P21 |
P24 |
P26F |
|
|---|---|---|---|---|---|---|---|---|
| Wavelength Range (C-band) | 1530 to 1565 | nm | ||||||
| Outpower @ 1550 nm (EOL) | 12 | 15 | 17 | 19 | 21 | 24 | 26 | dBm |
| Input Operating Range (EOL) | -5 to +7 dBm | -5 to +10 | dBm | |||||
| Noise Figure @ 1550 nm | ≤ 5 dB @ -5 dBm input | |||||||
| Isolation (input & output ports) |
≥ 32 | dB | ||||||
© 2010 - MPB Communications Inc. | All specifications subject to change
For more detailed specifications or information on any of our product or services, please contact the head office