Narrow-Band
Raman Fiber Amplifier Systems

Near Infrared & Visible

EXPOSITIONS


Laser World of Photonics

13-16 May 2013
Canadian Pavilion, # 249
Hall B2

 

Narrow-Band Raman Fiber Amplifier Systems
Near Infrared & Visible

1053/526nm, 1064/532nm, 1120/560nm, 1140/570nm, 1160/580nm, 1166/583nm, 1178/589nm, 1185/592nm, 1212/606nm, 1240/620nm, 1256/628nm, 1284/642nm, 1294/647nm, 1340/670nm.
Custom wavelengths also available.

MPBC’s Raman Fiber Amplifier System is capable of amplifying a narrow, polarized, NIR input signal without spectrum broadening.

In addition, MPBC offers the option of converting the NIR signal into the visible region.

NIR output powers of up to 8 Watts can be achieved with MPBC’s air-cooled platform, and a water-cooled option is available for even higher power for specific wavelengths.

If visible output is required, MPBC single-pass SHG can handle output powers of up to 2 Watts.

The VRFA System consists of three modules:

Features

Specifications

Narrow-Band Visible Raman Fiber Amplifier System

Parameter

Min

Nom

Max

Units

Comments

Input signal power 10 15   mW

 

Amplification Wavelength -0.5 λ 0.5 nm where λ is between 1120 and 1184-nm
Output Wavelength   560 to 650   nm depending on model
Output Power   2*   W  
Adjustable Power Range   10   110 % % of nominal
Output Linewidth     5 MHz Determined by the seed signal
Relative Intensity Noise     1 % RMS, 5Hz-100kHz
Polarization Linear   Vertical in respect to the base
Polirization Extinction Ratio   98   %  
Power Stability     +/- 2 % /hour APC, after 30 min warm-up
Transverse Mode TEMoo    
Beam Quality     1.1 M2  
Beam Diameter nom-20% 0.32 nom+20% mm Measured at 20 mm from the output window
Beam Divergence nom-20% 2.7 nom+20% mrad

 

* Higher output power available upon request